150 mm x 270 mm x 73 mm NTN NJ2230E cylindrical roller bearings

Accessories:One Shield; d:75.000 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:24200 N; D:105.0000 mm; Sealed Speed Rating n3:3600 rpm; Basic Static Radial Load Rating Co:22400 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Grease Speed Rating Open/Shielded n1:6000 rpm; Fillet Radius ra:1.00 mm

a:3807 mm; Mass bearing:6380 kg; Calculation factor e:1.5; r1,2 min.:25.4 mm; D1 ≈:3322 mm; Calculation factor Y0:0.44; Comparative radial load rating CF:3650 kN; T:393.7 mm; Comparative axial load rating CFa:5330 kN; C:203.2 mm;

Grease Speed Rating Open/Shielded n1:2700 rpm; Sealed Speed Rating n3:1900 rpm; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:3300 rpm; Basic Dynamic Radial Load Rating C:203000 N; B:55.00 mm; d:95.000 mm; Fillet Radius ra:3.00 mm; D:250.0000 mm; Basic Static Radial Load Rating Co:173000

J min.:320.675 mm; P180°:60.9 kN; Da:200 mm; PG:1/4 NPT; Appropriate attachment bolt size G:0.75 in; RG:3/8 NPT; Housing:SAF 522; Adapter sleeve assembly:SNW 22x4; Pa:17.3 kN; Cap bolt, SAE grade:5;

Basic Dynamic Radial Load Rating C:20800 N; d:105.000 mm; Fillet Radius ra:1.00 mm; D:130.0000 mm; B:13.00 mm; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:23600 N; Accessories:Two Seals; Grease Speed Rating Open/Shielded n1:4500 rpm; Oil Speed Rating Open/Shielded n2:5300 rpm

B:92 mm; Dimension series:4GD; Ca min.:12 mm; a:80.835 mm; Da max.:323.5 mm; C:75 mm; Calculation factor Y0:0.8; Basic dynamic load rating C:1267 kN; Da min.:286 mm; da max.:217 mm;

Basic Dynamic Radial Load Rating C:87100 N; Oil Speed Rating Open/Shielded n2:6300 rpm; D:130.0000 mm; Accessories:Seal & Snap-Ring; Basic Static Radial Load Rating Co:52000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:5200 rpm; d:50.000 mm; Sealed Speed Rating n3:3700 rpm; B:31

B:39.70 mm; Basic Static Radial Load Rating Co:43000 N; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:5000 rpm; D:90.0000 mm; d:40.000 mm; Oil Speed Rating n2:6700 rpm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:60500 N; Sealed Speed Rating n3:5000 rpm;

b1:7 mm; Fatigue load limit Pu:106 kN; Basic static load rating C0:1000 kN; d1 ≈:184 mm; Snap ring Seeger:SW 220; Mass bearing:8.8 kg; D:220 mm; Ca2:61 mm; das:180 mm; r3,4 min.:0.6 mm;

b1:mm; D:420 mm; b:mm; rs (min):4 mm; B:65 mm; E:mm; Pu:85.420 kN; r1s (min):4 mm; F:316 mm; s:5 mm;

P90°:71.2 kN; Bearing:23024 CCK/W33; Da:180 mm; Initial grease fill:181.44 g; L:387.35 mm; N1:22.225 mm; R1:58.737 mm; J min.:295.275 mm; P60°:119 kN; Cap bolt, SAE grade:5;

with cylindrical bore:2 400 min-1; rs (min):2.1 mm; D:170 mm; d:95 mm; Pu:346 kN; Dynamic (Cr):4.5 mm; B:43 mm; with tapered bore:3 200 min-1; Static (Cor):8.3 mm; Oil:51.710 kN;

Basic static load rating C0:425 kN; B:38 mm; D:440 mm; Limiting speed:1500 r/min; Calculation factor Y0:0.76; a:112 mm; Da max.:429 mm; Db max.:443 mm; Calculation factor e:0.68; Calculation factor A:0.824;

Coefficient of friction µ max.:0.15; a:3 mm; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; α:105 °; h:16 mm; Permissible sliding velocity v min.:0 m/s; D:22 mm; Permissible sliding velocity v max.:0.5 m/s; Coefficient of friction µ min.:0.08;

Da:26 max; Bearing designation:6001  ; Grease:25 000 min-1; Pu:0.107 kN; Oil:30 000 min-1; d:12 mm; Dynamic (Cr):5.094 kN; Weight:0.022 kg; da:14 min; ra:0.3 max;